Super-strong Deoxidizer
Classification:
Key Words:
Baobab sand
Telephones: 0086-0398-3186627
- Product Description
-
- Product Name: Super-strong Deoxidizer
Application: carbon steel, alloy steel, stainless steel main components: rare earth alloy, calcium alloy, silicon, manganese alloy, etc the efficacy of super deoxidizer: 1, Solve the porosity defect 2, Reduce the sulfur content of molten steel 3, Improve the fluidity 4, More suitable for stainless steel 5, Purify molten steel 6, Solve the pitting hard point 7, Solve the white point 8, Solve the slag hole defect 9,Improve the mechanical properties 10. Solve sand sticking defects
Application: carbon steel, alloy steel, stainless steel
Main components: rare earth alloy, calcium alloy, silicon, manganese alloy, etc.
Super Deoxidizer (10) efficacy
1. Solve the pore defect: rare earth reacts with iron oxide in molten steel to reduce the oxygen content
2. Reduce the sulfur content of molten steel: solve the problem that medium frequency furnace cannot deoxidize
3, Improve liquidity: because it does not contain aluminum, so improve the fluidity of molten steel.
4, More suitable for stainless steel: due to the calcium deoxidizer, the martensite, ferrite stainless steel solubility is low, so the alternative calcium deoxidization
5. Purification of molten steel: rare earth energy and low melting point elements form high melting point compounds into molten slag, which can change the shape of MnS slag and float upward.
6. Solve the hard points of pitting points: pitting points and hard points caused by aluminum oxide caused by aluminum deoxidation
7. Solving white spots: white spot defects caused by hydrogen
8. Solve slag hole defects: due to deoxidation, the compounds formed by oxygen, silicon and AI are reduced, and slag hole defects cannot be caused by floating up.
9, Improve the mechanical properties: the calculation effect, improve the strength to change the shape of slag inclusion, improve toughness
10. Solve the defect of sticking sand: deoxidize well and reduce the content of iron oxide to avoid the formation of low melting point silicate due to the contact of molding sand during the pouring process, resulting in sticking sand.
Super deoxidizer use methods:
1. When the molten steel comes out to 1/3 of the ladle, it will be added into the ladle at one time.
2. After the molten steel is finished, sprinkle the slag remover to cover it, and it can be poured after 2 minutes of sedation.
3. Don't remove slag when pouring, just block the pouring with slag cotton.
Super deoxidizer dosage:
Stainless Steel Products
1. Super deoxidizer: 0.2-0.3%
Other steel grades
1. Super deoxidizer: 0.2-0.3%
2. Aluminum or calcium deoxidizer: 0.025-0.05%
Relevant knowledge
Chenghui
Online Messages
If you have any suggestions or feedback to our company, please fill in the relevant information on this page and submit it. A staff member will contact you in time, or please call us directly.
General Manager